Number:
HP-160
UHF Antenna Amplifier HP-160
Retail price
Market price
Keywords:
Inventory
0
Download:
Weight
隐藏域元素占位
- Product Description
- Technical Specifications
- Connection
-
The antenna splitter is a UHF antenna distribution system with amplification capabilities; it expands the functionality of wireless microphone systems by splitting a single pair of antennas to multiple wireless receivers.
It can also amplify RF signals to compensate for insertion loss caused by distributing signal power across multiple output connectors.
Each wireless distributor allows up to four receivers to use the same pair of antennas. It can be connected to a fifth receiver or a second wireless distributor.
It also features an electrical cascade connector power interface capable of supplying power to the UHF system of a wireless receiver.
Each system includes the following components: an antenna distribution system, rack-mounting hardware, surface-mounting hardware, an 18-inch power output cable, and a power cord. To ensure maximum sensitivity and signal-processing capability, it can support the widest range of radio frequencies for numerous wireless receivers.
To fully utilize the system’s capabilities, follow these guidelines: If you use extension cables for antennas installed at a distance, place multiple transmitters at least 3 meters (100 feet) away from the receiving antenna.
Expansion Capability: The UHF antenna distribution system is specifically designed for large-scale UHF wireless systems. Each unit allows four wireless receivers to share the same two antennas via a second splitter.
Compatibility: The splitter is compatible with all wireless microphone receivers operating within the compatible frequency range.
Cascading ports: Any output port can be connected to another distribution unit. Large wireless systems can operate using a single pair of antennas.
Power output and output connector.
Up to four (4) receivers can be daisy-chained to the power output and powered from a single power supply via the power output connector.
Low noise and intermodulation distortion. It can maintain a clear signal with minimal distortion.
Insertion Loss Compensation: When a signal is split across multiple output ports, its power level decreases.
The splitter can amplify and compensate the signal to ensure a strong signal is delivered to the receiver.
Directional Antenna for Activities
The directional antenna, a log-periodic dipole array, provides enhanced reception with the required coverage.
An integrated amplifier compensates for signal loss in coaxial cables and allows you to select a gain of 0.6 or 10 dB. It can be mounted on a microphone stand, suspended from the ceiling, or installed on a wall using the built-in swivel adapter bracket, making it suitable for outdoor use regardless of weather conditions.
Features:
1. Low-noise signal amplification compensates for the insertion loss of coaxial cables.
2. Compatible with any brand of UHF true diversity and antenna diversity wireless receiver systems; the integrated screw connector allows for easy mounting on a YOKKA windscreen bracket.
3. Three-gain selection switch; press the SET button on the panel to cycle through the options. Installation: 1. Connect the directional antenna to the receiver or the antenna distribution system, using the supplied low-loss coaxial cable.
Set Gain:
Press the SET button to cycle through the wireless gain settings: 0 dB for short, close-range runs, and +12 dB for long-distance runs with extended cables. Note that cable quality matters—signal loss depends not only on length but also on the cable’s construction. A lighter, shorter 50-foot cable may require more gain than a longer, lower-loss 100-foot cable. To set the selected gain using the LED indicator, briefly press the SET button on the amplifier.
Antenna Positioning: Use the following guidelines when installing the antenna:
1. The antenna and receiver must be from the same series.
2. Mount the antennas with a spacing of one wavelength (two feet) between each.
3. Ensure that there are no objects obstructing the line of sight between the antenna and the transmitter (including spectators).
4. Keep the antenna away from metal objects.
Usage Tips:
Before using a wireless system for a speech or performance, always run a “walk‑around” test to verify coverage. Test antenna positions to find the optimal spot. If necessary, note any “dead zones” so the presenter or performer can avoid those areas.
Technical specifications:
Receiving frequency range (470–952 MHz)
Power requirement: Remote 12 V DC coaxial push‑button receiver or antenna distribution system, 0.68–0.81 W. Reception pattern: cardioid. Beamwidth: 100 degrees. Antenna gain: axis: 7 dB. Standard gain indicators: 0 dB: red LED, 6 dB: yellow LED, 12 dB: green LED. Third‑order intercept point: 30 dBm. Connections: input and output: female BNC type.
Related products
Product Inquiry
Please provide your phone number and email address, and we will contact you promptly to resolve your issue as soon as possible.
Tianyi Electronics — a manufacturer and service provider of multifunctional conference systems, voting systems, simultaneous interpretation systems, and professional conference microphones.
Contact Information
Address: 3rd Floor, Building V1, Zone 2, Enping Industrial Transfer Park, Enping City, Guangdong Province
Leave a Message Online
Please provide your phone number and email address, and we will contact you promptly to resolve your issue as soon as possible.